View ISO-AX-PX-OX-SX_256413.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
www..com
Signal Isolated Amplifier
ISO-U(A)-P-O-S series: DC V/I Signal Isolated Distributor (Photoelectricity Isolation)
General characteristic:
Low cost,small size,SIP 12 anti- fire UL94V-0 package Can adjust "Zero"and "Gain" Three-port (power/input/output) isolation:3000VDC Assistant power:5VDC/12VDC/15VDC/24VDC 0-5V/0-10Vvoltage signal or 0-10mA/0-20mA/4-20mA/ current signal isolation and transfer Input port with a isolated power supply with good anti-jamming and high frequency signal capability
Applications
Two wires sensor distributor and signal transmission No distortion in long distance signal transmission Analog signal data acquisition 4-20mA(0-20mA)/0-5V signal isolation and transfer Equipment and sensor signal acquisition Signal transmit no-distortion Electric power,distant control,isolated safe bar Ground interference control
Specification:
ISO-U(A)-O series is a hybrid integrated circuit, this IC isolates and transfers DC signal signa,and make them linear correspondence to input signal.There is a isolated power supply on input port,and common ground with input signal.They are widely used in Electric power, distant control, instrument, medical instrument, and industrial control industries.
Part number and description:
ISO- U(A) - P -O -S
Input signal
U1:0-5V U2:0-10V U3:0-75mV U4:0-2.5V U8: User-defined A1:0-1mA A2:0-10mA A3:0-20mA A4:4-20mA A8: User-defined
Accessorial power supply P
P1:DC24V P2:DC12V P3: DC5V P4:DC15V P8: User-defined
Output
O1:4-20mA O2:0~20mA O4:0~5V O5:0~10V O6:1~5V O8:User-defined
Isolated P
S1:9V S2:15V S3:24V
Example:
1: Input 0-5V ; power supply:24VDC ,Output :0-5V Isolated power supply:15V Part number: ISO-U1-P1-O4-S2 2.Input:4-20mA, power supply:24VDC,Output:4-20mA Isolated power supply:24V Part Nomber:ISO-A4-P1-O1-S3
Http:www.szsunyuan.com E-mail:sales02@szsunyuan.com
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
www..com
Signal Isolated Amplifier
Max operation range:
Continue isolation voltage value Power Vin range: Jointing temperature(10sec.) MIN Load(output voltage signal) 3000VDC 25%Vin +300 2K
Note:If is over those range,products will be damaged permanently. General parameter:
Parameter Isolated voltage Temperature drift Non-linearity Input signal Input impedance Output signal Load capability Voltage Current Voltage Current Voltage Current Voltage Current Voltage Isolated power Current Ripple Accuracy Frequency response Signal output ripple Assistant power Voltage Power loss -45 -55 No-filter User-defined 3.3 supply output Vout=10V 0 5 20 0 0 2 500 0 0 1 250 15 20 * 750 24 Test Condition 1min Mix 3000 100 0.1 0.2 15 30 Type
1
Max Unit VDC ppm/ %FSR V mA M V mA k V mA
50 10
1 10 12 0.5 20 24 1 85 105
mV %
KHz mVRMS VDC W
Operating temperature Storage temperature
Output parameters:
Output item 4-20mA 0-20mA 0-5V 0-10V 1-5V 2K ohm 350(If need others,such as 650 ohm,pls note) 10mS Input over load Response time
Http:www.szsunyuan.com E-mail:sales02@szsunyuan.com
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
www..com
Signal Isolated Amplifier
Physical Dimensions and Footprint Description:
(1)voltage output footprint description:SIP 12
1 Vin+ 2 GND 3 PO+ 4 NO PIN 5 PW+ 6 PW7 NO PIN 8 Vo9 50K 10 50K 11 Vo+ 12 NO PIN
(2)Current output footprint description:SIP 12
1 Vin+ 2 GND 3 PO+ 4 NO PIN 5 PW+ 6 PW+ 7 Io+ 8 NO PIN or 2K(ZERO) 9 Adj (50K) 10 Adj (50K) 11 NO PIN or 2K(ZERO) 12 Io-
Note: only 0-xV or 0-xmAsuch as:0-5V/0-20mAinput,4-20mA output products with ZERO adjustment.
Http:www.szsunyuan.com E-mail:sales02@szsunyuan.com

▲Up To Search▲

Price & Availability of ISO-AX-PX-OX-SX

	To Download ISO-AX-PX-OX-SX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .